Home > Carpet-like > Miscellaneous > Mats By Manufacturer > Andersen Co. Mats >

Waterhog Eco Elite Roll Goods Logo Inlay

Alternative Views:

PLEASE CALL OR EMAIL US FOR PRICE QUOTES. THANK YOU!

$1000+ orders qualify for DISCOUNTS

Product Code: H24-WATERHOG PREMROLLGDSLOGOIN

Qty:

Description

Waterhog Eco Elite Roll Goods Logo Inlay mats

14 logo colors and 8 background colors to choose from. This logo matting is designed to be installed like carpeting or loose laid like area rugs. 30 oz/sq yard 100% Post Consumer Recycled PET polyester reclaimed from plastic drink bottles. Green friendly rubber backing has 15-20% recycled content.

Features

	Exclusive rubber-reinforced face nubs prevent pile from crushing, ensuring maximum product performance life and appearance retention.
	Premium anti-static 100% polypropylene fiber system will not fade or rot. Provides slip-resistant surface even when wet.
	Herringbone Pattern
	Custom Sizes up to 12' X 50'
	Eco-friendly rubber backing contains 20% recycled content.
	3/8" Thick

LOGO PATTERN BACKGROUND PATTERN

Maintenance:

1. Vacuum Daily

When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.

2. Routine Maintenance

Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.

3. Deep Cleaning

Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.

4. Floor Preparation

Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Carpet-like > Miscellaneous > Mats By Manufacturer > Andersen Co. Mats
Logo Mats
Carpet-like > Miscellaneous > Specialty Mats > Wider than 6' Mats
Carpet-like > Miscellaneous > Mats By Manufacturer > Superior Manufacturing Mats